Mikuni TM40-6 Flat Slide Carburettor, SR500, TT500, XT500, WITHOUT Rejetting Kit

  

Mikuni TM40-6 Flat Slide Carburettor, SR500, TT500, XT500, WITHOUT Rejetting Kit. Mikuni TM40 Flat Slide Carburettor, WITHOUT Rejetting Kit SR500 TT500 XT500 Description Pilot jet 17.5 (VM28/486), Needle 9DJY4-96 (replace with number change only 9DJY1), Needle Jet Y-6 (568 Series), Main Jet 165 (N100.604), Air Jet 1.1 Mikuni TM40-6 Dimension A= 44mm, B= 100mm, C= 165mm, D= 55mm Going fast has never been so easy, say goodbye to hard starting, hesitations and flatspots. This Mikuni TM40-6 carburetor is suited for high performance Yamaha 500cc SR, TT and XT models. This Mikuni TM40-6 Pumper carburetor fits as a direct replacement to the Yamaha SR, Yamaha TT and Yamaha XT inlet snorkel. There is a hose tail on the carb for connection to vacuum operated fuel taps.

The jets and pump nozzel required to make this carb operate on Yamaha 500cc single. Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc.. Equipment TM40-6: Carburetor with accelerator pump, gas slider with compulsive actuation (opening and closing), cold-start device (choke) and low pressure port e. For low pressure fuel petcocks, where applicable Fits SR500 and XT500 without modifications to the air filter box; in SRX600 airbox joints must be extended (supplied with Kit 33147) Mounting of K&N racing air filters possible (air filter box not applicable) For rejetting Kit see item K33118, K33123, K33273. Ikuni TM40 Flat Slide Carburettor, WITHOUT Rejetting Kit SR500 TT500 XT500.

Pilot jet 17.5 (VM28/486), Needle 9DJY4-96 (replace with number change only 9DJY1), Needle Jet Y-6 (568 Series), Main Jet 165 (N100.604), Air Jet 1.1. Mikuni TM40-6 Dimension A= 44mm, B= 100mm, C= 165mm, D= 55mm. Going fast has never been so easy, say goodbye to hard starting, hesitations and flatspots. Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc. For low pressure fuel petcocks, where applicable. Fits SR500 and XT500 without modifications to the air filter box; in SRX600 airbox joints must be extended (supplied with Kit 33147). Mounting of K&N racing air filters possible (air filter box not applicable). For rejetting Kit see item K33118, K33123, K33273. Sorry, our items are NOT available for pick-up. No additional information at this time. Header Pipe Nut, Knurled Stainless Steel, Allen Key type. Fender Mounting Rubber Grommet Fender. Yamaha DT125MX, XT250, TT500, XT50 OEM #.

Exhaust System, Stainless Steel, Race Style.