Mikuni TM36 -68Flat Slide Carburettor SR500, TT500, XT500, WITHOUT Rejetting Kit

  

Mikuni TM36 -68Flat Slide Carburettor SR500, TT500, XT500, WITHOUT Rejetting Kit. Mikuni TM36 Flat Slide Carburettor, WITHOUT Rejetting Kit SR500 TT500 XT500 Description The Mikuni TM36-68 is supplied with the following factory jetting installed: Pilot jet 12.5 (VM28/486), Needle 9DZH6-50, Needle Jet P-8 (568 Series), Main Jet 130 (N100.604), Air Jet 1.0 Mikuni TM36-68 Dimension (See Picture) A= 42mm, B= 100mm, C= 176mm, D= 54mm. Total width=75mm Going fast has never been so easy. These carburetors can be adapted to a number of different applications from single to multi-cylinder engines, giving better throttle response, improved acceleration, increased horsepower and torque.

In a number of instances Dyno tests have shown improvements of up to 25% when fitted to same size CV carburettored engines. Equipment TM36-68: Carburetor with accelerator pump, gas slider with compulsive actuation (opening and closing), cold-start device (choke) and low pressure port e. For low pressure fuel petcocks, where applicable Fits SR500 and XT500 without modifications to the air filter box; in SRX600 airbox joints must be extended (supplied with Kit 33147) Mounting of K&N racing air filters possible (air filter box not applicable) For rejetting Kit see item K33142. Mikuni TM36 Flat Slide Carburettor, WITHOUT Rejetting Kit SR500 TT500 XT500.

The Mikuni TM36-68 is supplied with the following factory jetting installed. Pilot jet 12.5 (VM28/486), Needle 9DZH6-50, Needle Jet P-8 (568 Series), Main Jet 130 (N100.604), Air Jet 1.0. Mikuni TM36-68 Dimension (See Picture) A= 42mm, B= 100mm, C= 176mm, D= 54mm. Going fast has never been so easy. For low pressure fuel petcocks, where applicable. Fits SR500 and XT500 without modifications to the air filter box; in SRX600 airbox joints must be extended (supplied with Kit 33147). Mounting of K&N racing air filters possible (air filter box not applicable).

For rejetting Kit see item K33142. Sorry, our items are NOT available for pick-up. No additional information at this time.

Header Pipe Nut, Knurled Stainless Steel, Allen Key type. Fender Mounting Rubber Grommet Fender. Yamaha DT125MX, XT250, TT500, XT50 OEM #. Exhaust System, Stainless Steel, Race Style.