Honda XR250 Mikuni TM34 Flatslide Non-Pumper Carburetor No Sleeve for POD 58mm

  
This kit comes with no sleeve fitted to suit a pod filter (Filter not included). Please note: This kit comes pre jetted. XR250 with Plastic tank and mechanical slide carb stock measures. This Carb comes with a 50mm sleeve fitted where with a little heat your air-box boot is a snug fit. XR250L Steel tank (also XR250R electric start)and CV carb stock measures. This Carb comes with a 54mm sleeve fitted where your air-box inlet will clamp down onto it. The Mikuni TM34 Non Pump type TM Flatslide carburetor has for decades been the economical replacement carb of choice for Honda XR250 riders who have worn out their OEM carbs or are just over some of their inherent problems. All this means getting the full enjoyment out of your Honda has never been so easy, say goodbye to hard starting, hesitations and flatspots.

These Mikuni carburetors are easily fitted to your Honda XR250 and are generally used with a POD or foam filter or can be connected to your OEM air-box on some models as mentioned in bold above. Sourcing of a sleeve to extend the length and slightly step down diameter of the carb inlet can allow the use of the OEM air-box on the later model XR250L also. The kit comes with a throttle cable and a choice of MX or VMX 1/4 turn quick action throttles and a nylon lined cable with a 90 degree lower fitting for the tight clearance on some models. There are jets provided that must be changed as well as spares for fine tuning.

Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc. For this reason, we have included what we have found to be a range of jets to allow you to tune to most variables. We have express options available for all our products also.

Townsville to Brisbane 3 days, Townsville to North/Just South and West is usually 1-2 days. NSW ACT & VIC 4-6 days, TAS & SA 4-8 days, WA & NT 8-12 days. NSW ACT & VIC 2 days, TAS & SA 2-3 days, WA & NT 3-4 days.

This is entirely out of our control if this occurs. The international service we use is generally. THIS IS JUST PLAIN OLD COMMON SENSE. Please also note that international parcels HAVE to be signed for and all parcels whether domestic or international are fully insured. THE FOLLOWING INFORMATION IS FINAL.

THIS IS FINAL AND NO OTHER EXCEPTIONS! This item is in the category "Vehicle Parts & Accessories\Motorcycle Parts\Air Intake & Fuel Delivery\Carburettors & Parts". The seller is "mikunioz" and is located in this country: AU.

This item can be shipped worldwide.

• Manufacturer Part Number: TMXR250-POD58
• Modified Item: Yes
• Machine Type: Dual Sport Motorcycle, Off-Road Motorcycle, Road Motorcycle
• Custom Bundle: No
• Modification Description: This kit comes pre jetted.

• Brand: Mikuni
• Type: Carburettor Kit
• Warranty: 90 Day