Flat Slide Carburetor

BMW R60 R75 R80 R100 Mikuni TM34 Flatslide carb kit

BMW R60 R75 R80 R100 Mikuni TM34 Flatslide carb kit
BMW R60 R75 R80 R100 Mikuni TM34 Flatslide carb kit

BMW R60 R75 R80 R100 Mikuni TM34 Flatslide carb kit   BMW R60 R75 R80 R100 Mikuni TM34 Flatslide carb kit
IMPORTANT NOTICE- For applications where replacing 40mm Bing Carbs which have a 52mm outlet spigot diameter at the motor end, we fit a larger 52mm sleeve so as to properly match your OEM rubber boot. YOU MUST REQUEST THIS OUTLET DIAMETER CHANGE WHEN ORDERING IF REQYIRED.

F replacing a 40 with this carb the total length will be 5mm shorter requiring a push forward of the air box connector. With all others do confirm on the smaller motors that your carb dimensions match (+ mm) as per the picture A=44 B=50 and D=110mm, some very early models do differ. Please specify your engine model when ordering. Even faster has never been so easy when stepping up from the stock carb to either a VM mikuni to even better with a TM flatslide, say goodbye to worn old flooding stock carbs, hard starting, irregular idle, hesitations, and flatspots.

The Dual Mikuni TM34 carburetor kit is easily fitted to your BMW R60, R75, R80, R100 and the improvement is instant. This kit includes our silver anodized sleeves fitted to both ends of the Mikuni TM34 to match the original Bing carburetor dimensions. There is also a pair of inner throttle cable wires provided to replace the existing inner cable where you are required to solder the provided nipples to the base of the new wire. The supplied carb dimensions are 50mm inlet x 110mm front to back length x 44mm outlet. The most commonly suited jets for Australian fuel and conditions have been fitted as well as spares for fine tuning the top end at WOT.

Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc. Once tuned a VM Mikuni will not go out of tune for many years. At Mikunioz, for the last 30 plus years, we have been constantly checking and where necessary upgrading our jetting specs as fuel quality changes.

Regular fuel in the USA is 85 octane or 91 in their premium brands which have numerous additives and blends added (basically smells and drys like wood varnish) which results in a totally different jetting spec and product performance. You will instantly experience better throttle response, improved acceleration, increased horsepower and torque. We have express options available for all our products also. Townsville to Brisbane 3 days, Townsville to North/Just South and West is usually 1-2 days. NSW ACT & VIC 4-6 days, TAS & SA 4-8 days, WA & NT 8-12 days.

NSW ACT & VIC 2 days, TAS & SA 2-3 days, WA & NT 3-4 days. This is entirely out of our control if this occurs. The international service we use is generally.

THIS IS JUST PLAIN OLD COMMON SENSE. Please also note that international parcels HAVE to be signed for and all parcels whether domestic or international are fully insured. THE FOLLOWING INFORMATION IS FINAL. THIS IS FINAL AND NO OTHER EXCEPTIONS!

The item "BMW R60 R75 R80 R100 Mikuni TM34 Flatslide carb kit" is in sale since Monday, December 3, 2018. This item is in the category "Vehicle Parts & Accessories\Motorcycle Parts\Air Intake & Fuel Delivery\Carburettors & Parts". The seller is "mikunioz" and is located in Townsville, Queensland.

This item can be shipped worldwide.

  • Non-Domestic Product: No
  • Manufacturer Part Number: BMWRTM34
  • Modified Item: No
  • Custom Bundle: No
  • Brand: Mikuni
  • Type: Carburettor


BMW R60 R75 R80 R100 Mikuni TM34 Flatslide carb kit   BMW R60 R75 R80 R100 Mikuni TM34 Flatslide carb kit